22 Best Play Day Quick Set Pool Reviews of June 2023 - Buying Guides (2024)

FAQs

How many gallons is an 8 foot by 30 inch pool? ›

The approximate assembled dimensions are 8' (diameter) by 30" (tall). The water capacity of the pool is 693 gallons.

Inflatable Swimming Pool 8ft x 24" (244cm x 61cm) diameter, water capacity 427 gal (1,942L / 513 US gal), made from puncture resistant material.

Inflatable Swimming Pool 6ft x 20" (183cm x 51cm) diameter, water capacity 194 gal (880 L / 232 US gal), made from puncture resistant material, easy to set up and ready for water in 10 minutes.

Water capacity: (80%) 1,018 Gal.

Measuring 12-Feet by 30-Inches and able to hold up to 1,718 gallons of water, this pool is the perfect size for any backyard fun.

It will take 2 - 3 hours to fill the pool with a hose. One last thing. You'll likely need a way to get in and out of the pool. An adult can just step over the sides and you can lift little ones but if you are in elementary school and you want them to get in and out on their own, you'll need a ladder of some sort.

The most common pool size and shape is a 16 by 32-foot rectangle. That's the minimum size you need for an 8-foot deep end. That gives you 8 feet of the shallow end. Bump up to a 16 by 40-foot pool, and you double your shallow end to 16 feet.

For a family of six to eight people, an 18 foot by 36-foot pool is recommended. This should be sufficient to avoid crowding and allow for the playing of games. Rectangle shaped pools look best for this size.

This will avoid overcrowding and allow everyone to enjoy the pool safely. For a family of 1-2 people, we recommend a minimum pool size of 14 x 25ft. For a family of 3-5 people, we recommend a minimum pool size of 16 x 32ft. For a family of 6-8 people, we recommend a minimum pool size of 18 x 36ft.

What is a good size pool for 6 adults? ›

Six to eight people will comfortably share an 18-foot by 36-foot pool. This pool size is spacious for larger groups with enough room for games. Five or fewer people would fit a 16-foot by 32-foot pool. This pool size allows for swimming and casual use.

We typically recommend a maximum swimmer load of approximately 25 sq. ft. of pool surface area per person (For a 500 sq. ft.

In general, the average size of an in-ground rectangular swimming pool is 10×20 feet for smaller pools and 20×40 feet for larger pools.

The average swimming pool takes 18,000-20,000 gallons of water to fill. This will cost you an average of $80.00-$100.00 on your water bill (Austin). Pools do not need to be refilled very often.

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.

If you're converting to a salt water system for the first time, you'll need about six or seven 40-pound bags of pool salt (for a 10,000-gallon pool). On the other hand, if your salt levels are just low (around 1,000 PPM), you'll only need about four or five 40-pound bags of pool-grade salt.

How Much Pool Shock is Needed to Open a Pool? SPP spring pool chemical kits include up to 4 lbs of Calcium Hypochlorite pool shock, but you may need more. In a clear and clean pool, the standard pool shock treatment of 1 lb. per 10,000 gallons is usually sufficient.

Use 1-3 tablets at a time, depending on your pool size. You'll need enough to establish and maintain proper chlorine levels. Small Intex pools under 12′ in diameter should use 2-4 of the 1″ tablets in a chlorine floater.

Can you fill a pool too fast? ›

On those hot days, concrete swimming pools need to be filled up faster than normal. The water actually helps keep the swimming pool cool and helps the concrete curing process. If the curing process is done too slow or too fast this may cause damage to the swimming pool.

Will 2 hoses fill a pool faster than 1? Yes. If you have two hoses hooked up to the spigot, it will fill your pool faster than if only one hose is running into the pool. When using two hoses, each hose should be receiving around 11 GPM (gallons per minute).

Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.

Once the pool is opened and the floor and walls have been brushed the first chemical you should add is chlorine to shock it. It's recommended you add a gallon of liquid chlorine or pound of granular chlorine for every 5,000 gallons of water in the pool.

This could result in the walls of the pool collapsing altogether. An uneven ground also means that your water level will be off, and your liner can become damaged if it's not lying flat. This can result in tears or rips within your liner, which is certainly something you should avoid.

An above ground pool needs to be setup on level ground. Manufactures typically state a pool should be level within an inch, while those who are OCD may try to do even better. An above ground pool that is off level by 3 inches or more is unsafe.

Sand is the recommended base for an above ground pool, but not all sand is the same. Different types of sand are used for different applications. And it's important to use the right one for your above ground pool. Moulding Sand: Also called foundry sand, this sand binds together more closely when moisture is added.

A recreational pool needs a large shallow area. Most pool steel walls are 42” high and the water level is about 4” lower—halfway or a bit higher into the skimmer. That means 38” standard shallow end, and typically a 6-foot deep end.

What is a good size for an inground pool? The average small inground pool is around 12 feet wide and 24 feet long and a little over 5 feet deep. A pool of this size can adequately provide space for everything that most average households need.

As the name suggests, a lap pool is designed for swimming laps, so they need to be long. Lap pools are typically about 40 feet long, but they can reach up to 75 feet. Their width ranges from six to 10 ft. Experts recommend a minimum depth of 3-1/2 feet so swimmers don't scrape their hands or feet on the bottom.

What is a good depth for a family pool? ›

Most “fun” pools should have a minimum depth of three feet to accommodate for both adults and children, and a maximum depth of four to five feet, for safety. Swimmers who swim laps seriously should look for a minimum depth of five feet, and a length of 25 meters. What's the ideal safe height for adults?

The popular 12-by-24-foot oval above ground pool is ideal for a family of four or a group of four to five people at most. This above ground pool size is popular for balancing space in a backyard and easy use and leaves room for designing a pool deck or patio.

Common Freeform Pool Dimensions

There is not a standard size chart for freeform pools, but the most common sizes are as follows: 16 feet wide by 30 feet long. 15 feet wide by 35 feet long.

So, what is the average size of a residential swimming pool? Most backyard pools are between 10 to 20 feet wide by 20 to 40 feet long and 6 to 8 feet deep.

15' x 30' Above Ground Pools are the perfect fit for those with a small family or with a large amount of space. A 15'x30' foot above ground pool will comfortably fit 7-8 average size adults to swim, float and play.

A 12' x 24' foot above ground pool will comfortably fit 4-5 average size adults to swim, float and play. There are approximately 6,800 gallons in a 52" above ground pool and requires approximately 2 cubic yards of sifted(playground) sand to create a 2" layer under the liner and create a sand cove.

Ideal Safe Height For Adults

Most people are satisfied with the standard depths of 3-5 feet in a pool with multiple depths but it cannot be a right decision if you and your spouse's height are not suitable to those pool depths.

For a lap pool, the average size is about 10 feet wide and 50 feet long, which is pretty large. However, the average size for a smaller in-ground pool can range from 10 feet by 20 feet, and a larger pool is about 20 feet by 40 feet.

If you want to swim exactly a mile in a 25-meter pool, you'll need to swim 64.3736 lengths. Many lifeguards tell patrons to either round down to 64 lengths or up to 66 to keep things simple. Swimming exactly a mile in a 50-meter pool means completing 32.1868 lengths.

How much water does a 20 foot by 52 inch pool hold? ›

Water capacity is 8,638 gallons (90%) and it is ready for water in 60 minutes.

Lap pools can be as small as 6 by 30 feet or as large as 10 by 50 feet. Plunge pools are small, ranging from 6 by 10 feet to 8 by 20 feet on average. Endless pools generally range from 9 by 15 feet to 15 by 20 feet. You can get a pool as small as 6 by 8 feet.

A traditional pool has a shallow end on one side, about 3.5′ deep and eventually drops to 5′ or deeper. A pool that has a diving board requires at least an 8′ deep end. Years ago, about 90% of swimming pools that where installed had diving boards.

Pool managers strive to keep the “free chlorine” level of pool water between about one and three parts per million.

To that end, pools make use of sanitizing agents. The most common sanitizer used in public pools is chlorine. Chlorine is a pool oxidizer, meaning it breaches the cell walls of bacteria, viruses, algae, and other organisms and eliminates them from the inside out.

Length x width x depth x 7.5 = volume (in gallons)

Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.

It takes 1 ounce of chlorine in 7,500 gallons of water to equal 1 ppm. We will divide 30,000 gallons by 7,500 to get 4. It requires 4 ounces of chlorine to raise the parts per million of this example pool by 1.

How much chlorine does it take to shock a pool? ›

You also need to shock your pool with chlorine. Add 2 cups (400 grams) of granulated chlorine (not stabilised) or 3 tubs of 15L chlorine (as it's actually only 20% chlorine and the rest is water).

The average garden hose pumps out 8 to 9 gallons of water per minute (though it can vary from 4 to 12 gallons). If you're wondering how long it takes to fill up a pool with a garden hose, it takes anywhere from 24 to 48 hours to fill an average-sized pool.

How Much Pool Shock Do I Need for a Season? Most pools should have a 12-pack, or 12 lbs of pool shock on hand, to use for summer super chlorination, shocking or algae treatment. Larger pools may want to buy the 24-pack, while smaller pools can use the 6-pack of pool shock.

How much water does my pool need to refill from evaporation? The average amount of water evaporation during the summer is approximately half of an inch loss per day. Multiplied by seven days, that's 3.5 inches per week. Use the calculation below to get a monthly estimate of the evaporation rate of your pool.

You should aim to have your water sitting at the halfway point of your skimmer hatch (which sits on the side of your pool). It is recommended you have your swimming pool water level between one-third and one-half up the pool skimmer box opening.

42” PANELS come standard in our pool kits. This wall height creates a traditional 3'4” shallow end depth which is typically preferred for younger children or inexperienced swimmers.

One pound of shock treats up to 10,000 gallons of pool water. Also, keep the pool filter and pump running for at least 10 hours during and after you shock.